Skip to main content
Technicians installing a new high-efficiency gas furnace in a Toronto basement
TSSA-Licensed Gas Technicians Since 2005
Rebates Filed

Furnace Replacement Toronto: Mid and High-Efficiency Installs with Written Repair-vs-Replace Advice

80% AFUE from $3,500 CAD, 95% AFUE from $5,500 CAD. Removal, disposal, and permit included, rebate paperwork filed for you.

$3,500 to $8,500 CAD installed replacement

Why Toronto Homeowners Call Us

  • TSSA G1 and G2 licensed technicians
  • 20+ years of GTA furnace service
  • Diagnostic waived on same-visit repair
  • Written repair-vs-replace recommendation
20+ Years GTA Furnace Experience
5-Star Customer Satisfaction
4-Hour Emergency Response
TSSA Licensed G1 and G2 Certified

What Does Furnace Replacement in Toronto Involve?

Is your heating system starting to sound a bit rough on those freezing January nights? When facing a Furnace Replacement Toronto project, we know exactly how stressful it feels to wonder if your equipment will make it through another Canadian winter.

You want a reliable, warm house without spending a fortune.

Pro Tip: Upgrading your furnace before it completely fails gives you the time to compare prices and find the best equipment for your home.

Our team has helped thousands of property owners upgrade their heating systems smoothly and safely. A proper replacement involves the complete removal of your old gas unit and the installation of a brand new one.

This process must be handled by a TSSA G1 or G2 licensed technician to meet the Ontario Building Code and the strict CSA B149.1 natural gas regulations.

We take care of all the technical details, from heat-loss sizing and gas connections to Electrical Safety Authority (ESA) verification. The service also covers plenum and duct transitions, removing your old equipment, and a final commissioning combustion analysis.

Efficiency TierTypical Installed Price (CAD)
Mid-efficiency 80% AFUE$3,500 to $5,500
High-efficiency 95% AFUE$5,500 to $8,500

We even file the latest rebate paperwork for you, so grab a cup of coffee and let’s go through the details together. Let’s look at exactly what goes into making a smart, cost-effective choice.

New high-efficiency furnace installed with PVC venting and sealed plenum transitions

5 Signs Your Furnace Should Be Replaced, Not Repaired

It is completely normal to wonder whether to fix an aging unit or just start fresh. We usually tell customers to look for a few clear red flags before making a decision. Spending money on constant fixes for an older Lennox or Carrier model might just drain your wallet.

Our checklist below highlights the clear indicators that a new unit is the safer, smarter choice.

  • A confirmed cracked heat exchanger. A licensed tech will use a camera inspection and find elevated Carbon Monoxide (CO) during a combustion analysis. A cracked heat exchanger results in an immediate TSSA “Red Tag” shutoff in Ontario. On a 15-plus-year-old unit, this is always a replacement scenario.
  • The unit is past 20 years old. Most gas furnaces last 15 to 25 years before critical parts fail. Past the 20-year mark, components fail in a rapid sequence.
  • Repair costs approaching half the price of replacement. A $1,200 CAD repair on a 19-year-old 80% AFUE unit is simply wasted money. Our technicians see this happen often with older Goodman or Rheem units.
  • Rising gas bills with no change in habits. A worn blower motor and declining combustion efficiency will inflate your utility costs long before a total breakdown occurs, so an inefficient system will hurt your budget even more as gas rates keep climbing.
  • Uneven heat and constant short cycling. Older units were frequently oversized during their initial installation. A proper replacement, sized using a strict heat-loss calculation, finally fixes the cold spots and comfort problems a basic repair never could.

How the Repair-vs-Replace Recommendation Is Calculated

We provide every customer with a clear, written diagnostic recommendation. This evaluation uses four critical inputs to help you make an informed choice.

The criteria include the furnace age against its expected service life, the condition of the heat exchanger, the exact CAD cost of your needed repair, and your potential annual gas savings. Upgrading an old 80% AFUE system to a modern 95% AFUE model from a brand like Trane or Lennox can slash your heating fuel consumption by a massive 15 to 20 percent.

Our team wants you to have complete transparency into how we advise our clients. Some contractors might push for an early replacement, but a simple $200 flame sensor fix on a 12-year-old system is always a straightforward repair.

Furnace ageHeat exchanger intactTypical recommendation
Under 12 yearsYesRepair, almost always
12 to 18 yearsYesRepair if the fault is a single component
15+ yearsNoReplace
20+ yearsYesCompare repair cost against efficiency gain
25+ yearsEitherReplace

What the Installed Price Includes

We ensure your final quote covers absolutely everything required for a safe, code-compliant installation. You will never face hidden fees or surprise charges on installation day.

Our standard installed price includes a comprehensive list of services and materials.

  • Removal and eco-friendly disposal of the old unit.
  • The new furnace, plus all gas piping, connections, and ESA-verified electrical hookups.
  • Required venting upgrades, specifically using ULC S636 certified PVC pipe for any condensing conversion.
  • A condensate drain and neutralizer, which protects your plumbing from the acidic runoff produced by 95% AFUE models.
  • Custom sheet metal plenum and duct transitions.
  • The municipal permit and full commissioning, including a combustion analysis, CO verification, static pressure check, and a thermostat cycle test.

We quote a few specific items separately if our initial assessment shows your home needs them. Duct sealing typically costs $299 to $899 CAD. A compatible smart thermostat, like a new ecobee or Google Nest, usually runs $199 to $549 CAD depending on the model.

Ontario Rebates on a High-Efficiency Replacement

Figuring out government rebates can feel confusing, but our experts know exactly how to maximize your return. A 95% AFUE condensing furnace upgrade often qualifies for serious financial incentives.

We actively monitor program details to ensure you get every dollar you are eligible for as an ENERGY STAR certified installer.

Here is a quick look at the programs we file on your behalf:

  • Enbridge Home Efficiency Rebate Plus: Up to $6,500 CAD on a qualifying 95% AFUE installation paired with the right home envelope upgrades.
  • Canada Greener Homes Grant: Up to $5,000 CAD for eligible households upgrading to a high-efficiency system.
  • Manufacturer Promotions: Brands like Lennox and Carrier occasionally run seasonal promotions that can be stacked with provincial rebates.
  • Expert Filing Assistance: We file all this complex paperwork directly on your behalf, preventing the common mistakes that cause homeowners to lose out on free money.

A successful Furnace Replacement Toronto project requires careful planning and expert execution. For the efficiency side of the decision in detail, see high-efficiency furnace conversion.

If you are installing in a new build or an addition rather than swapping an existing unit, see furnace installation Toronto.

The full set of published scope bands is on the furnace repair Toronto homepage.

How Much Does Furnace Replacement Cost in Toronto?

These ranges are published, not quoted on request. Every invoice itemises the diagnostic fee, parts, labour, and disposal separately.

Scope of Work Cost (CAD)
Mid-Efficiency Furnace Replacement (80% AFUE) $3,500 to $5,500
High-Efficiency Furnace Replacement (95%+ AFUE) $5,500 to $8,500
Boiler Replacement $6,500 to $12,500
Cold-Climate Heat Pump Installation $6,500 to $14,500
Duct Sealing and Inspection (if required) $299 to $899
Thermostat Installation (if required) $199 to $549

Installed pricing includes removal, disposal, venting, permit, and commissioning. Enbridge and federal rebate paperwork is filed on your behalf where the unit qualifies.

Why Choose Best Furnace Repair Toronto for Furnace Replacement

20+ Years of Furnace Repair Experience

We repair furnaces every day, which is why our replacement advice is grounded in what actually fails and when, not in a sales quota.

Heat-Loss Sizing, Not Guesswork

The new unit is sized to your home's heat loss and duct capacity. An oversized furnace short-cycles and wears out early.

Permit and Code Handled

Ontario Building Code compliance, ESA-verified electrical, and the municipal permit filed with the correct office for your address.

Rebate Paperwork Filed

ENERGY STAR certified installer for Enbridge Home Efficiency Rebate Plus and the Canada Greener Homes Grant. We submit the forms.

Commissioned, Not Just Installed

Every install ends with a combustion analysis, CO verification, static pressure check, and a full thermostat cycle test.

Honest Repair-vs-Replace Advice

If the furnace has years left in it, we say so. Replacement is recommended on the numbers, not on the age of the badge.

How Our Toronto Furnace Diagnostic Process Works, 5 Steps

01

Assessment and Heat-Loss Sizing

Furnace age, heat exchanger condition, duct capacity, venting path, and a heat-loss calculation to size the new unit correctly.

02

Written Options in CAD

Mid-efficiency and high-efficiency options side by side, with installed cost, expected gas savings, and rebate eligibility.

03

Permit and Scheduling

Municipal permit filed, equipment ordered, and the install scheduled within 3 to 5 business days, or 24 hours for emergency no-heat.

04

Removal and Installation

Old unit disconnected and removed, venting and gas piping installed to code, electrical hooked up to ESA requirements, plenum transitions sealed.

05

Commissioning and Rebate Filing

Combustion analysis, CO verification, airflow check, thermostat cycle test, written warranty, and rebate paperwork submitted for you.

Need Furnace Replacement in Toronto or the GTA?

Same-day dispatch, TSSA-licensed technicians, and the diagnostic fee waived when you authorise the repair on the same visit.

What Actually Stops Toronto Homeowners From Calling a Furnace Technician

The four hesitations we hear most often before a furnace replacement booking, answered plainly.

“The diagnostic fee feels like a trap.”

Our diagnostic starts at $99 CAD and is waived when you authorise the repair on the same visit. It covers a full combustion analysis, a CO check, and a written fault report you keep either way.

“You cannot tell if the technician is really licensed.”

Ontario requires TSSA G1 or G2 certification for gas furnace work. Ours hold both, and certificate numbers appear on every invoice per B149 fuel code so you can verify them on the TSSA public registry.

“Nobody will publish the price.”

Every CAD range for this service is published on this page, above. Scope named, itemised into diagnostic, parts, labour, and disposal, with no quote form in the way.

“How do I know the work will not fail again next month?”

Combustion analysis is re-run and the CO reading verified before we leave, and the parts and labour warranty is issued in writing, typically 1 to 5 years depending on the part and manufacturer.

Furnace Replacement Jobs Across the GTA

Click any image to view it larger.

What Customers Say About Our Furnace Replacement

“Twenty-two year old furnace, cracked heat exchanger. The furnace replacement quote laid out 80% and 95% AFUE side by side with installed CAD costs and the rebate maths. Installed in a day, permit handled.”
G Gordon P. Toronto (High Park)
“They told me my furnace had another five years in it and did the repair instead. Two winters later I came back for the replacement and went with them without getting other quotes.”
N Nisha K. Brampton
“Mid-efficiency to condensing conversion including the new venting run. Clean work, sealed transitions, and they submitted the Enbridge rebate paperwork without me asking twice.”
D Derek L. Vaughan (Concord)

Furnace Replacement Questions, Answered

How much does a furnace replacement cost in Toronto?

Mid-efficiency 80% AFUE runs $3,500 to $5,500 CAD installed. High-efficiency 95% AFUE runs $5,500 to $8,500 CAD installed. Both figures include removal, disposal, venting, permit, and commissioning. Boiler replacement runs $6,500 to $12,500 CAD and a cold-climate heat pump runs $6,500 to $14,500 CAD.

When should I replace rather than repair my furnace?

Replace when the heat exchanger is cracked, when the unit is past 20 years with repeat failures across different components, or when the repair cost approaches half the installed cost of a new high-efficiency system once the efficiency gap is counted. Under 15 years with an intact heat exchanger, repair is usually the better position.

80% AFUE or 95% AFUE, which should I choose?

A 95% AFUE condensing furnace costs $2,000 to $3,000 CAD more installed but cuts natural gas use 15 to 20 percent and qualifies for Enbridge and federal rebates that can offset much of the difference. Mid-efficiency still makes sense where the venting path cannot accommodate condensing venting.

What rebates apply to a new furnace in Ontario?

Enbridge Home Efficiency Rebate Plus offers up to $6,500 CAD on qualifying 95% AFUE installs paired with envelope upgrades, and the Canada Greener Homes Grant offers up to $5,000 CAD. Program rules and funding change, so eligibility is confirmed in writing before you commit.

How long does a furnace replacement take?

A straightforward same-configuration swap takes 6 to 8 hours, so one working day. A mid-efficiency to condensing conversion that needs a new venting run, a condensate drain, and plenum modifications can take a day and a half.

Do you handle the permit?

Yes. The municipal permit is filed with the correct office for your address, which matters in Thornhill where properties sit across the Vaughan and Markham boundary. Electrical connections are completed to Electrical Safety Authority requirements.

What size furnace do I need?

It is calculated, not guessed. We run a heat-loss calculation for your home and check duct capacity and static pressure. An oversized furnace short-cycles, heats unevenly, and wears out the heat exchanger faster than a correctly sized one.

Can I keep my existing ductwork and thermostat?

Usually yes. Existing ductwork is checked for capacity and leakage, and sealing is quoted separately at $299 to $899 CAD if it is needed. Most thermostats carry over, though a condensing unit with staging may need a C-wire or a compatible thermostat at $199 to $549 CAD.

What happens to the old furnace?

Removal and environmentally compliant disposal are included in the installed price. You do not pay a separate haul-away charge and you do not need to arrange anything.

What warranty comes with a new furnace?

Manufacturer warranties on new equipment typically run 10 years on parts and 20 years to lifetime on the heat exchanger depending on the brand and registration. Our installation labour warranty is issued separately in writing. Most manufacturer warranties require documented annual maintenance to stay valid.

Can you replace a furnace in winter?

Yes, and most replacements happen in winter because that is when failures surface. For an emergency no-heat situation we keep the home safe, prioritise the install within 24 hours where equipment and access allow, and work through the cold.

Do you replace rental furnaces from Reliance or Enercare?

Yes, once you have confirmed the buyout position with your rental provider. We will walk through the buyout figure against a purchased replacement so you can see which one leaves you better off over 10 years.

Still have a question about your furnace?

Tell us the symptom, the furnace age, and your postal code. We will tell you what it likely is and what the CAD range looks like before anyone is dispatched.

Same-Day Emergency Dispatch, 24/7 Cold Snap Response

Book Furnace Replacement With a TSSA-Licensed Technician

Give us the symptom, the furnace age, and your postal code. You get the fault in writing and the CAD cost before any work on your furnace replacement begins.

  • Diagnostic waived on same-visit repair
  • TSSA G1 and G2 licensed technicians
  • Published CAD pricing, no quote gating
Call Now